[STOCK ROM] Qmobile Noir A8 Stock ROM Jelly Bean 100% tested!!

Direct Download Apk

NOTE: This post is taken from XDA- Developers site original thread ( http://forum.xda-developers.com/showthread.php?t=2353691 ) who tested this himself and is working 100%. I don't take any responsibility if you brick your phone or something goes wrong.

Screen shots:

IMPORTANT Downloads:
A8 USB DRIVERS
MT6577 Usb VCOM Drivers
A8 Stock ROM JB Complete
SP_Drivers (MediaTek DA USB
SP FLash Tool v3.1224.01



The process is simple.

1. Make sure you have installed the Qmobile Noir A8 usb adb drivers as well as MediaTek DA usb drivers. (You can find them all in the attachements SP_Drivers_V1.4 and A8_usb_driver).

2. Download firmware archive and unzip to a folder. You will get a folder with following files :-


android-info.txt
apdb_mt6577_s01_main2.1_w10.24
apdb_mt6577_s01_main2.1_w10.24_enum
boot.img
bplguinfocustomappsrcp_mt6577_s00_maui_11amd_w12_2 2_sp_v15
cache.img
dsp_bl
ebr1
fat.img
files.txt
installed-files.txt
kernel_gionee77_cu_jb.bin
logo.bin
mbr
mt6577_android_scatter_emmc.txt
preloader_gionee77_cu_jb.bin
ramdisk-recovery.img
ramdisk.img
recovery.img
secro.img
system.img
uboot_gionee77_cu_jb.bin
userdata.img
wbg5803_release_note.txt


3. Now turn off your Qmobile Noir A8 and pull out the battery.

4. Run SP Flash Tool (run as administrator if you are using windows 7/8, in my case I was using windows 8 x64). Now click on Scatter-loading button and choose MT6577_Android_scatter_emmc file from my firmware folder. You will see all the regions will be selected and you can see the relevant files from the folder.

5. Now press Firmware->Upgrade button and put battery back in your Qmobile Noir A8 and plug in the usb cable.

6. If you have already installed the VCOM drivers it will detect it and a red progress bar will be shown. After 100% your mobile will disconnect and reconnect (at this stage Mediatek DA usb drivers will be installed for your device if you already have installed them if not install the drivers and repeat the process). A few more progress bars will be shown and after 5~10 mins you will get a green circle and OK at status bar.

7. Congratulations, you have just upgraded your QMobile Noir A8 from Icecream Sandwich to Jelly Bean.

8. Now just pull out your battery and put it back in and turn on your mobile. Wow! its that simple and great.
 
THIS IS POSSIBLE ALL THANKS TO A XDA MEMBER. THE ORIGINAL THREAD'S LINK IS MENTIONED ABOVE.

Direct Download Apk