JB 4.2.1 For Qmobile A20 with Installation Instructions:

Direct Download Apk

The Following ROM has been ported to Qmobile A20 and is working fine.

Disclaimer: I am not responsible if you misunderstood the procedure and bricked your phone.

Here are some Screenshots of the ROM

You Need a Rooted A20 with TWRP installed on it.

Installation Procedure:

1: Download the ROM from link given below:

                    http://d-h.st/Z57

2: Copy it to your sd-card without extracting it.

3: Reboot into Recovery Mode by Powering Off the device and then pressing Vol Up + Power Buttons at the same time for 6 seconds.

4: Assuming we are using TWRP. when into Recovery Mode, Click Wipe and Then Click Cache when Cache is cleared, go back and click Dalvik Cache and when dalvik cache is cleared, go back and click Factory Reset. Once Factory Reset is done, Go back and click System.

5: After those steps, go back to Main Menu and click Install (first one). Now select the zip you just copied into your sd-card and Swipe to flash the zip file. After Flashing is complete, Click Reboot and wait for the device to boot-up.

There you are with JB 4.2.1 on Qmobile A20. Remember, First of all provided to you by AndroidsPakistan.

Stay Connected there is much more.

If you face any problem, just comment below....

Direct Download Apk